wtop0:Select this to switch Phantasm into colour table creation mode.
wtop1:Select this to switch Phantasm into colour table alteration mode.|M(In order to activate this option, drag an existing ArtWorks colour table onto the arrow target area below.)
wtop2:Drag an ArtWorks text file colour table onto this area to allow an Phantasm to alter it.|M(The file may be dragged directly from the ArtWorks file export menu or from a filer window.)
wtop3:Drag an ArtWorks text file colour table onto this area to allow an Phantasm to alter it.|M(The file may be dragged directly from the ArtWorks file export menu or from a filer window.)
wtop4:Drag an ArtWorks text file colour table onto this area to allow an Phantasm to alter it.|M(The file may be dragged directly from the ArtWorks file export menu or from a filer window.)
wtop5:Drag an ArtWorks text file colour table onto this area to allow an Phantasm to alter it.|M(The file may be dragged directly from the ArtWorks file export menu or from a filer window.)
wtop6:These are the help options availiable...
wtop7:Click here to view the help file which states the latest additions that may not be stated in the manual.
# Messages for interpolate window
intr-1:Phantasm colour interpolation window.
intr0:The start colour may be set as "none" so that the interpolation of colours only occurs between two colours.|M(You will not be able to select this a colour if you have specified the interpolation as a tint, below.)
intr1:Click this to pick a colour if you wish to select a shade which is not present in named colour list.
intr2:The base colour is the origin colour for the start and end colours.|M(You will not be able to select this a colour if you have specified the interpolation as a tint, below, in which case it will automatically set to white.)
intr3:Click this to pick a colour if you wish to select a shade which is not present in named colour list.
intr4:The end colour is always selectable as it is either used as the end colour for standard interpolation or as the basis colour when creating tints.
intr5:Click this to pick a colour if you wish to select a shade which is not present in named colour list.
intr6:The number of interpolations determines the amount of "inbetween steps" generated in total.
intr7:Enter the number of interpolations here.
intr8:When ticked a linear set of interpolations will be produced.|M(This means that the amount of change in colour for each step will be the same)|MIf unticked a non-linear effect will be produced like the shading on a curved surface.
intr9:By ticking this the set of graduated colours will be saved as a tint regardless of the Save options settings.|M(Note that the Start colour will be eliminated and the Base colour will be automatically turned to white.)
intr10:Clicking on Cancel will close the interpolation window without making any alteration effective.
intr11:Clicking on OK will make any alterations effective.|M(By clicking with the adjust mouse button the window will remain visible as well as making any alterations effective.)
intr12:Click here to pop-up the currently loaded named colour menu from which to select a colour.
intr13:Click here to pop-up the currently loaded named colour menu from which to select a colour.
intr14:Click here to pop-up the currently loaded named colour menu from which to select a colour.
intr15:***New Help Message***
# messages from 'info' window
info-1:Information about your copy of Phantasm.
info0:Description of purpose of program.
info1:Description of purpose of program.
info2:Application name.
info3:Application name.
info4:This program is covered by international copyright laws!|MPlease refer to the application documentation for details allowing use of this software.
info5:Phantasm was written on commission for Astute Graphics by Ben Ollivère of Grasshopper Software. It has subsequently been bought by APDL / ProAction.
info6:This version number of the application.
info7:This version number of the application.
info8:The legal user of this copy of Phantasm.|MPlease note that this identification is "burned" into the program and is tracable to the original purchaser who is held responsible for any illegal copies!
info9:The legal user of this copy of Phantasm.|MPlease note that this identification is "burned" into the program and is tracable to the original purchaser who is held responsible for any illegal copies!
info10:Unique serial number of this copy of Phantasm.|MThis application is tracable to its origins of purchase...
info11:Unique serial number of this copy of Phantasm.|MThis application is tracable to its origins of purchase...
info12:License type.|MPlease refer to the documentation for a further description.
info13:License type.|MPlease refer to the documentation for a further description.
# messages from 'create' window
crea-1:Phantasm is currently in creation mode.
crea0:
crea1:Create a full range palette which represents the colours of the rainbow.
crea2:For those indecisive moments...
crea3:Specify the number of full range colours in the box, right.
crea4:Enter a number here between 1 and 999.
crea5:Specify the number of random colours in the box, right.
crea6:Enter a number here between 1 and 99.
crea7:Click here to specify the interpolation details.
# messages from 'shift to colour' window
shft-1:Phantasm is currently in Sift to colour alteration mode.
shft0:
shft1:Click here to bring up a list of alteration function options.
shft2:Click this to pick a colour if you wish to select a shade which is not present in named colour list.
shft3:The amount of colour shifting may be specified below...
shft4:Slide the blue bar to quickly adjust the level of adjustment.
shft5:Slide the blue bar to quickly adjust the level of adjustment.
shft6:Slide the blue bar to quickly adjust the level of adjustment.
shft7:You can precisely enter your required value here.|M(Percetange value from zero to 100.)
shft8:The value entered is in percent.
shft9:Phantasm Ignore options.
shft10:Tick this to ensure that selected colours or separations are ignored/masked from the particular alteration function above.|M(Phantasm will automatically tick it for you when you select at least one colour or separation and deselect it if no colours or separations are specified for ignoring.)
shft11:Click here to bring up the currently loaded colour table list from which to select a colour to shift all other colours to.|M(This excludes Ignored colours.)
shft12:Click here to display the list of colours selectable for ignoring in a colour alteration function.
shft13:Click here to bring up the four colour separations (Cyan, Magenta, Yellow and Key) which may be ignored.
# messages from 'convert to monochrome' window
mono-1:Phantasm is currently in Convert to monochrome alteration mode.
mono0:
mono1:Click here to bring up a list of alteration function options.
mono2:Click this to pick a colour if you wish to select a shade which is not present in named colour list.
mono3:The amount of colour adjustment may be specified below...
mono4:Slide the blue bar to quickly adjust the level of adjustment.
mono5:Slide the blue bar to quickly adjust the level of adjustment.
mono6:Slide the blue bar to quickly adjust the level of adjustment.
mono7:You can precisely enter your required value here.|M(Percetange value from zero to 100.)
mono8:The value entered is in percent.
mono9:Phantasm Ignore options.
mono10:Tick this to ensure that selected colours or separations are ignored/masked from the particular alteration function above.|M(Phantasm will automatically tick it for you when you select at least one colour or separation and deselect it if no colours or separations are specified for ignoring.)
mono11:Click here to bring up the currently loaded colour table list from which to select a colour to shift all other colours to.|M(This excludes Ignored colours.)
mono12:Click here to display the list of colours selectable for ignoring in a colour alteration function.
mono13:Click here to bring up the four colour separations (Cyan, Magenta, Yellow and Key) which may be ignored.
# messages from 'increase lightness' window
ligt-1:Phantasm is currently in Adjust lightness alteration mode.
ligt0:
ligt1:Click here to bring up a list of alteration function options.
ligt2:The amount of lightness may be specified below...
ligt3:You can precisely enter your required value here.|M(Percetange value from -100 to +100.)
ligt4:The value entered is in percent.
ligt5:Phantasm Ignore options.
ligt6:Tick this to ensure that selected colours or separations are ignored/masked from the particular alteration function above.|M(Phantasm will automatically tick it for you when you select at least one colour or separation and deselect it if no colours or separations are specified for ignoring.)
ligt7:Click here to display the list of colours selectable for ignoring in a colour alteration function.
ligt8:Click here to bring up the four colour separations (Cyan, Magenta, Yellow and Key) which may be ignored.
ligt9:Slide the blue bar to quickly adjust the level of adjustment.
ligt10:Slide the blue bar to quickly adjust the level of adjustment.
ligt11:Slide the blue bar to quickly adjust the level of adjustment.
ligt12:Zero adjustment level indicator.
ligt13:Click on here to increase the level of adjustment in 5% steps.
ligt14:Click on here to decrease the level of adjustment in 5% steps.
ligt15:Click in the centre tringle indicator to instantly revert the level of adjustment to zero.
# messages from 'increase contrast' window
cont-1:Phantasm is currently in Adjust contrast alteration mode.
cont0:
cont1:Click here to bring up a list of alteration function options.
cont2:The amount of contrast may be specified below...
cont3:You can precisely enter your required value here.|M(Percetange value from -100 to +100.)
cont4:The value entered is in percent.
cont5:Phantasm Ignore options.
cont6:Tick this to ensure that selected colours or separations are ignored/masked from the particular alteration function above.|M(Phantasm will automatically tick it for you when you select at least one colour or separation and deselect it if no colours or separations are specified for ignoring.)
cont7:Click here to display the list of colours selectable for ignoring in a colour alteration function.
cont8:Click here to bring up the four colour separations (Cyan, Magenta, Yellow and Key) which may be ignored.
cont9:Slide the blue bar to quickly adjust the level of adjustment.
cont10:Slide the blue bar to quickly adjust the level of adjustment.
cont11:Slide the blue bar to quickly adjust the level of adjustment.
cont12:Zero adjustment level indicator.
cont13:Click on here to increase the level of adjustment in 5% steps.
cont14:Click on here to decrease the level of adjustment in 5% steps.
cont15:Click in the centre tringle indicator to instantly revert the level of adjustment to zero.
# messages from 'increase saturation' window
satu-1:Phantasm is currently in Adjust saturation alteration mode.
satu0:
satu1:Click here to bring up a list of alteration function options.
satu2:The amount of saturation may be specified below...
satu3:You can precisely enter your required value here.|M(Percetange value from -100 to +100.)
satu4:The value entered is in percent.
satu5:Phantasm Ignore options.
satu6:Tick this to ensure that selected colours or separations are ignored/masked from the particular alteration function above.|M(Phantasm will automatically tick it for you when you select at least one colour or separation and deselect it if no colours or separations are specified for ignoring.)
satu7:Click here to display the list of colours selectable for ignoring in a colour alteration function.
satu8:Click here to bring up the four colour separations (Cyan, Magenta, Yellow and Key) which may be ignored.
satu9:Slide the blue bar to quickly adjust the level of adjustment.
satu10:Slide the blue bar to quickly adjust the level of adjustment.
satu11:Slide the blue bar to quickly adjust the level of adjustment.
satu12:Zero adjustment level indicator.
satu13:Click on here to increase the level of adjustment in 5% steps.
satu14:Click on here to decrease the level of adjustment in 5% steps.
satu15:Click in the centre tringle indicator to instantly revert the level of adjustment to zero.
# messages from 'misc' window
misc-1:Phantasm is currently in Miscellaneous alterations mode.
misc0:
misc1:Click here to bring up a list of alteration function options.
misc2:Phantasm Ignore options.
misc3:Tick this to ensure that selected colours or separations are ignored/masked from the particular alteration function above.|M(Phantasm will automatically tick it for you when you select at least one colour or separation and deselect it if no colours or separations are specified for ignoring.)
misc4:Click here to display the list of colours selectable for ignoring in a colour alteration function.
misc5:Click here to bring up the four colour separations (Cyan, Magenta, Yellow and Key) which may be ignored.
misc6:Invert the colours (100% effect).
misc7:Revert imported colour table file to original status.
# messages from bottom section of window
botm-1:Phantasm
botm0:
botm1:Click here to bring up the Save options window.
botm2:Drag this icon to save/export the resulant colour table text file.
botm3:Name for the colour table to be saved as.
botm4:Apply any changes specified above
botm6:If the button is raised then Phantasm has linked its saved file to a particular application (eg. ArtWorks). To break this link and force Phantasm not to continuously update this linked application click here.
# other windows with no icons
ignr-1:Ignore colour list.|M(By clicking with the adjust mouse button, the window will stay up ready for another selection, otherwise it will instantly dissapear.)
igcy-1:Ignore separation list.|M(By clicking with the adjust mouse button, the window will stay up ready for another selection, otherwise it will instantly dissapear.)
wpal-1:Current palette display.|M(Clicking menu over each colour will give further details regarding the colour composition.)
cols-1:
#icon bar help
iconbar:This is the !Phantasm icon.|MClick Select to open the main window.|MClick Menu for options and application information.|MClick Adjust for the current Phantasm palette.
icbarm1:Move to pointer to the right to give version, copyright and license details about this copy of Phantasm.
icbarm4:Click here to bring up Phantasm's current palette.
icbarm7:Click here to bring up the Save options window.
icbarm10:Click here to reset Phantasm to its upon loading state.
icbarm13:Click here to quit Phantasm.
#select mode menu
smodem1:Click here to switch to Shift to colour alteration mode.|M(Useful for transparency effects...)
smodem4:Click here to switch to Convert to monochrome alteration mode.|M(Useful for making monochrome images, not just black and white...)
smodem7:Click here to switch to Alter lightness alteration mode.|M(Useful for creating shaded-out backdrops...)
smodem10:Click here to switch to Alter contrast alteration mode.|M(Useful for fine adjustment to get correct print results...)
smodem13:Click here to switch to Alter saturation alteration mode.|M(Useful for creating overtoned striking images...)
smodem16:Click here to switch to Miscellaneous alteration mode.|M(Its possible to invert image colours and revert all colours back to their original state...)
#save options
save-1:Phantasm's Save options window. Please refer to manual for information on buttons due to complex nature.
save0:Refer to manual.
save1:Refer to manual.
save2:Refer to manual.
save3:Refer to manual.
save4:Refer to manual.
save5:Refer to manual.
save6:Refer to manual.
save7:Refer to manual.
save8:Refer to manual.
save9:Refer to manual.
save10:Refer to manual.
save11:Refer to manual.
save12:Refer to manual.
save13:Refer to manual.
save14:Click here to close this window without bringing to effect any changes.
save15:Click here to ensure changes made, just for this session.
save16:Click here to ensure settings and save for next session.
